Call Us Today: (714) 898-8558 | E-mail: pft@pftinc.net
STANDARD PRODUCTSBushing, Spring PunchCasingDieFiller, BackingFingersHolder, CutterSemi-Finished CarbideHexagon InsertsKnives, Cut-OffPinsPunchQuills, Cut OffRolls, FeedWafer, Hexagon Supplies

Punch, Hexagon Recess - Insert Type

Punch, Hexagon Recess - Insert Type
TOOL PART
NUMBER
A. DIA.
+.0000
-.0005
B. DIA.
(A + 1/16
APPROX.)
E
DEGREES
F HEX
FLAT
+.0000
-.0008
G H J
UNDER-
CUT HEX
L
PFT1721 1/8 TO BE SPECIFIED BY CUSTOMER
PFT1722 1/8
PFT1731 3/16
PFT1732 3/16
PFT1741 1/4
PFT1742 1/4
PFT1751 5/16
PFT1752 5/16
PFT1761 3/8
PFT1762 3/8
PFT1771 7/16
PFT1772 7/16
PFT1781 1/2
PFT1782 1/2

MATERIAL: A.I.S.I. M-42

TO ORDER:

Also available in carbide. Prices on request.

* Last digit of part number indicates Type1 or Type2

Punch, Spring "S" Type


TOOL PART
NUMBER
HEADER A
DIA.
D DIA.
SIZE
HOLE
MIN.
K L
LENGTH
M P
DEG.
R
RADIUS
W
DIA.
PFT1221 1/8 National .812 .090 .720 1-17/64 7/32 50° 1/8 3/8
PFT1222 1/8 Headmaster .812 .090 .720 1-13/32 7/32 40° 3/32 3/8
PFT1222 0 Waterbury Toggle .812 .090 .720 1-13/32 7/32 40° 3/32 3/8
PFT1223 1/8 Hartford .812 .090 .720 1-17/64 7/32 50° 1/8 3/8
PFT1231 3/16 National .8745 .125 .751 1-39/64 31/64 50° 1/8 1/2
PFT1231 3/16 Hi-Pro .8745 .125 .751 1-39/64 31/64 50° 1/8 1/2
PFT1231 3/16 Headmaster .8745 .125 .751 1-39/64 31/64 50° 1/8 1/2
PFT1231 1 Waterbury Toggle .8745 .125 .751 1-39/64 31/64 50° 1/8 1/2
PFT1232 3/16 Hartford .8745 .125 .751 1-7/8 25/32 45° 5/32 5/8
PFT1241 1/4 National 1.2495 .156 1.063 2-13/64 23/32 45° 1/8 5/8
PFT1241 1/4 Roy 1.2495 .156 1.063 2-13/64 23/32 45° 1/8 5/8
PFT1241 2 Waterbury Toggle 1.2495 .156 1.063 2-13/64 23/32 45° 1/8 5/8
PFT1241 1/4 Waterbury 1.2495 .156 1.063 2-13/64 23/32 45° 1/8 5/8
PFT1242 1/4 Super Hi-Pro 1.2495 .156 1.059 2-1/4 7/16 45° 1/8 5/8
PFT1251 5/16 Hi-Pro 1.374 .183 1.187 1-15/16 7/8 45° 5/32 3/4
PFT1252 5/16 National 1.374 .183 1.187 2-3/32 7/8 45° 5/32 7/8
PFT1253 5/16 HartFord
(Lots 1 and 2)
1.374 .183 1.187 2-1/2 31/32 45° 5/32 3/4
PFT1254 5/16 HartFord
(Lots 3 & Subs)
1.374 .183 1.187 2-13/16 1-17/32 60° 11/64 7/8

MATERIAL: A.I.S.I. M-2

NOTE: Impression available on request.

TO ORDER:

1. Specify tool part number and quantity required
2. For "D" diameter, on request holes can be made smaller than minimum shown.

Spring Punch, "K" Type

TOOL PART
NUMBER
HEADER A
DIA.
D DIA.
SIZE
HOLE
MIN.
K L
LENGTH
M N P
DEG.
R
RADIUS
W
PFT1225 1/8 National .812 .090 .720 1-41/64 7/32 1-7/32 50° 1/8 3/8
PFT1235 3/16 National .8745 .125 .751 1-61/64 31/64 1-17/32 50° 1/8 1/2
PFT1235 3/16 Hi-Pro .8745 .125 .751 1-61/64 31/64 1-17/32 50° 1/8 1/2
PFT1235 3/16 Head-master .8745 .125 .751 1-61/64 31/64 1-17/32 50° 1/8 1/2
PFT1245 1/4 National 1.2495 .156 1.063 2-13/32 23/32 5/8 45° 1/8 5/8
PFT1245 1/4 Roy 1.2495 .156 1.063 2-13/32 23/32 5/8 45° 1/8 5/8
PFT1245 2 Waterbury Toggle 1.2495 .156 1.063 2-13/32 23/32 5/8 45° 1/8 5/8
PFT1245 1/4 Waterbury 1.2495 .156 1.063 2-13/32 23/32 5/8 45° 1/8 5/8
PFT1255 5/16 Hi-Pro 1.374 .183 1.187 2-31/32 7/8 7/16 45° 5/32 3/4
PFT1256 5/16 National 1.374 .183 1.187 2-31/32 7/8 7/16 45° 5/32 7/8
PFT1265 3/8 National 1.749 .218 1.530 3-3/4 13/16 1-1/3 45° 5/32 7/8

MATERIAL: A.I.S.I. D-2

NOTE: Impression available on request.

TO ORDER:

1. Specify tool part number and quantity required
2. For "D" diameter, on request holes can be made smaller than minimum shown.

Site created by ThomasNet Web Solutions